Concrete Formwork & Shuttering Products

15mm / 20mm / 26mm available

Dywidag Tie Bar Connectors are used to join the rods complete with centre stop to ensure equal spacing inside the connector. The connectors are available for next day delivery if ordered before 2.30pm.

22mm/ 26mm / 32mm available

Thruty cones are used at the ends of the thruty sleeve and can be easily extracted after removal of the formwork, to form a chamfered recess for subsequent grouting with Tie Hole Sealer.

The Tie Bar is inserted through the tie bar sleeving and cone . The Tie Bolt cones can be removed once striking of the concrete has taken place and the hole filled with Tie Hole Filler.

For use on Formwork Applications

Dywidag Pressed Waler Plates are used for timber or steel walings in conjunction with a winged nut or a hex nut for load transfer. The embossing of the plate increases its rigidity. Load capacity depends on the contact area, the admissible bearing pressure and the threadbar that is used. Dywidag Waler Plate to be used in conjunction with 15mm Tie Bar, 22mm Plastic Sleeving, Tie Bar Cones and Wing Nuts. These components complete the Dywidag Tie Bar Formwork System.

Form Anchors are a versatile non-corrosive anchor which is used for securing single sided climbing formwork complete with nailing plate for fixing to formwork. Can also be used for securing slab edge formwork, guard rail, etc. Also available Cast In Anchors & Plastic Anchors .

Form Anchors are a versatile non-corrosive anchor which is used for securing single sided climbing formwork complete with nailing plate for fixing to formwork. Can also be used for securing slab edge formwork, guard rail, etc. Also available Cast In Anchors & Plastic Anchors .

3 mt lengths Re-usable PVC

Void formers are made from rigid PVC and are used to form grooves in concrete that can easily be fixed by nailing directly onto shuttering. Designed to withstand expected site conditions, they can be re used several times. The slight tapered shaping stops the void former from adhering to the concrete and therefore allows easy removal to provide a clean void.

PVC Tape for Covering Joints in Formwork

A specially developed matt finish waterproof pressure-adhesive PVC tape for use on all types of concrete formwork. Excellent adhesion even where residual release agent is present on form face.

Used on Metal , Timber and Formwork materials

Mould Oil is a blend of bio-degradable oils emulsified in water and is designed for use in general site operations and precast yards. The oil forms a physical barrier between the form and the concrete with the surfactant working in conjunction with the alkalinity of the concrete to produce a high standard of finish.

Mould Oil is appled by spray or brush , prior to concrete pour , and as near to time of placement of concrete as practical consditions permit.

Mould Oil data Sheet

Adjustable Kickers are used to space wall shutters thus eliminating the need for a traditional kicker. They can be located in the centre of the wall with a cap on each end (double sided) or offset with one cap only (single sided) where a waterbar is present, or in a wide wall. Packed in 50s.

Adjustable Kickers come as a complete set , with plastic spacers on each end. The cross bar can also be offset by hand.

Adjustable Kicker Data Sheet

Bag Column formers are a single use of formwork system that gives an excellent smooth fair face surface finish. The column formers are manufactured by welding together several layers of high quality polyethylene. Once this is complete, a water resistant foil is also spirally wound over the kraft paper, sealing the column against humidity. This manufacturing process requires no additional adhesives which reduces the wall thickness, making the BAG Column formers light and easy to handle. Maximum pour height for sizes below is 6 metres , we can supply column formers up to 1200mm diameter. Column Former Data Sheet

Ground Heave is the expansion of soil, typically caused by an increase in moisture content.

The Cordek range of ground heave solutions are designed to protect floor slabs, ground beams and pile caps from the effects associated with expansive soil types. In addition to ground heave protection, the product range includes systems which incorporate permanent formwork, insulation and passive ground gas venting options.

Cellcore HX B is designed for use beneath reinforced concrete ground beams and pile caps to protect against the potential effects of ground heave. The product consists of a cellular construction of Expanded Polystyrene which has been designed, moulded and tested to tight tolerances to achieve the specified performace characteristics.

Cellcore HX S is designed for use beneath reinforced concrete floor slabsto protect againstthe potential effects of ground heave. The product consists of a cellular construction of Expanded Polystyrene which has been designed, moulded and tested to tight toleranaces to achieve the specified performance characteristics.

Cellcore Data Sheet

Also Available: Cellcore HX Plus | Cellcore HG | Cellform HX System | Heaveguard | Heaveguard Pile Collars | Cellvent HX

Expanded Metal Sheet is a galvanized permanent shuttering system with a unique design incorporating mesh and roll formed ribs. This system retains poured concrete and achieves a significant reduction in the pressure of concrete normally associated with conventional formwork. It can be placed before reinforcing rods which are installed after by piercing them through the mesh area in the Hy-rib.

Applications include construction joints, stop ends and retaining walls where the surface finish to the concrete is not important but is also suitable for installation in water retaining structures . Hy Rib / Rib Stop data Sheet